Spinnaker SDK Release Notes

The following list enumerates all of the enhancements and resolved issues.
Teledyne FLIR software and firmware version numbering scheme / standards

Jump to: 4.1 (Linux) | 4.1 (Mac) | 4.0 | 3.2 | 3.1 | 3.0 | 2.7 | 2.6 | 2.5 | 2.4 | 2.3 | 2.2 | 2.1 | 2.0 | Older

Spinnaker SDK – 4.2.0.21 (Linux/ARM)

This version is for Linux AMD64 and ARM64 22.04 for use with the Bumblebee X stereo camera.

Enhancements

Added support for Linux USB large transfer breakup to U3V stream issues that broke starting in Ubuntu kernel 6.8.0-40
Improved gev_nettweak script to run on Ubuntu Jammy ARM64
Added support for Stereo QuickSpin nodes
Added StereoAcquisition QuickSpin Example
Renamed C++ API function ApplySpeckleFilter to FilterSpeckles to better reflect its intention
Added support for enabling depth cursor info by default for disparity stream in SpinView_QT
Added support for depth map info and display in SpinView_QT ARM64 when heatmap is not available

Resolved Issues

Fixed error reading XML URL when USB camera is enumerated at high speed
Fixed Spinnaker camera definition reording that could break backwards compatibility without recompilation
Fixed issue where API function LoadPointCloudFromPly does not correctly load back point cloud data
Fixed issue where library cannot detect GEV camera in updater mode when adapter subnet mask is too restrictive
Cleaned up Spinnaker GenTL logs having messages about getting interface info for non-existent drivers
Fixed issue where PointCloud extents (min and max X, Y, Z) are not being applied properly
Fixed stability issues when repeatedly starting/stopping stream in SpinView_QT
Fixed video recording issues in SpinView_QT
Fixed image saving permission issues in SpinView_QT
Fixed image zooming issues in SpinView_QT
Fixed image frame rate display issues in SpinView_QT
Fixed image stream window footer status aesthetics issue in SpinView_QT
Fixed single acquisition stream view issue in SpinView_QT
Fixed issue where depth info is still enabled after disabling depth map display in SpinView_QT
Fixed depth map display to be unclamped and only clamp for heat map display in SpinView_QT
Fixed issue where stereo distance is incorrectly calculated in SpinView_QT when coordinateOffset is updated
Fixed issues related to camera disconnect/connect and wrong subnet in AcquisitionMultipleCameraRecovery example
Fixed issue in StereoAcquisition example to make sure example has correct write permission before starting
Updated Bumblebee X stereo camera technical reference document to describe the current state of StreamID node
Updated GetUniqueID API documentation

Known Issues

Image/video recording is disabled in SpinView_QT on Linux ARM for Bumblebee X Stereo cameras
Image heatmap display is disabled in SpinView_QT and not supported in the API on Linux ARM
Executing TLDevice DeviceReset may put Bumblebee X stereo camera in updater mode. Execute regular camera DeviceReset node instead.
Image display flickering may be found in SpinView_QT on Linux ARM and workarounds are described in the README
StreamOutputBufferCount are expected to be 0 when streaming with multistream cameras

Spinnaker SDK – 4.1.0.338 (Linux)

This version is for Linux 22.04 for use with the Bumblebee X stereo camera.

Enhancements

Added Bumblebee X stereo camera Spinnaker library support (ImageUtilityStereo, PointCloud, ImageList classes)
Added Bumblebee X stereo camera C++ examples support (StereoAcquisition, StereoGPIO)
Added Bumblebee X stereo camera SpinView QT GUI application support
Upgraded Intel IPP from version 7 to 9 to improve image processing performance
Added support for applying speckle filter to stereo disparity images in SpinView QT application
Added support for heatmap display in SpinView QT application
Added support for depthmap display in SpinView QT application
Added support for saving image sets for Bumblebee X stereo camera in SpinView QT application
Added support for displaying depth and pixel value at cursor location in SpinView QT application
Added support for displaying invisible nodes in SpinView QT application
Added support for configuring packet size and current throughput for Bumblebee X camera in SpinView QT application

Resolved Issues

Fixed issue where debian package does not remove environment paths added by the package
Fixed memory leak and crash with long running GEV camera streams
Fixed issue where Mono10 pixel format conversion was not following PFNC specification
Fixed memory leak when repeatedly disconnecting and connecting cameras
Fixed heatmap creation for mono16 pixel format
Fixed issue where ImageList::GetByStreamIndex returns nullptr instead of throwing an SPINNAKER_ERR_NOT_AVAILABLE exception
Fixed issue where Spinnaker library does not propagate null character from chunk data correctly to the user
Fixed an issue where GetNextImageSync returns empty ImageList instead of a SPINNAKER_ERR_TIMEOUT exception
Fixed issue where StreamPacketResendRequestedPacketCount was not tracked properly
Fixed issue where image timestamp is zeroed out when there are packets resent for an image
Fixed streaming related issues with different amount of components enabled for multi-stream cameras
Fixed issue where SpinView QT application doesn't launch documentation
Fixed issue where SpinView QT application highlighted checkbox can be toggled even when the node is locked
Fixed issue where SpinView QT application doesn't handle errors when saving to write protected directory
Fixed issue where SpinView QT application shows the color processing context menu when debayering is not required for a specific pixel format
Out-of-date documentation for examples, API and getting started document are updated

Known Issues

U3V large payload transfers are broken starting in Ubuntu kernel 6.8.0-40
Host side stream buffer counts does not increment properly for Bumblebee X Camera
Newest related buffer handling modes do not synchronize the images properly for Bumblebee X camera
Linux error reading XML URL when re-enumerating USB camera on USB2 speeds
Feature tab closes when executing GEVDiscovery node in SpinView QT application
Environment variables does not apply properly after installation before a reboot
Cannot detect camera in monitor mode on Linux when subnet mask is too restrictive

Spinnaker SDK – 4.1.0.172 (MacOS)

This version is for Apple Silicon Macs (tested with Sonoma). For Intel-based Macs (up to MacOS 11.6), use version 3.2.

Resolved Issues

Fixed issue in README where homebrew installation URL was incorrect
Fixed memory leak with GEV camera packet resends
Fixed memory leak with initializing and deinitializing nodemaps

Spinnaker SDK – 4.1.0.157 (MacOS)

Enhancements

Added support for Apple Silicon based Mac for MacOS versions 11.x to 14.x
Added support for new Lumenera Lt-C6480 cameras
Added support for explicitly requesting command acknowledgement in SendActionCommand API call
Added support for only tracking GEV camera heartbeat when camera is initialized to reduce unecessary traffic
Added support for MP4 recording in SpinVideo
Added SaveToVideo example for MacOS
Updated PDF API documentation to web based documentation
Removed dependency on MacPorts
Improved open source licensing documentation

Resolved Issues

Cleaned up C examples to print proper spinGetLastErrorMessage() messages
Updated Spinnaker GenTL to expose both camera XMLs as defined in the specification properly
Updated AcqusitionMultipleCameraRecovery example to properly handle user input
Updated LLC examples to demonstrate checking of image incomplete status after conversion
Fixed issue where GEV action command request ID wasn't incremented according to GigEVision specification
Fixed issue where PySpin GetNextImage timeout memory leaks
Fixed issue where SpinView_QT doesn't always refresh after Force IP
Fixed issue where BufferHandling Example was not working for USB cameras and not returning errors properly
Fixed issue where application crashes upon library cleanup on MacOS
Fixed issue where Dalsa camera's Mono12 and Mono12packed pixel formats weren't being converted properly
Fixed issue where Hearbeat is being mistakenly disabled in the examples in release configuration
Fixed issue where SpinVideo recording could miss frames if video is closed before frames are encoded
Fixed broken web link in documentation
Fixed issue where running multiple Spinnaker instances could interfere with each other when using USB devices
Fixed issue where packet resend request counter was not updating
Fixed issue where FileAccess_QuickSpin example does not compile properly

Spinnaker SDK – 4.0.0.116

Breaking Changes

Updated ManagedDeviceEventHandler to use GetDeviceEventPayload() instead of GetDeviceEventMessage, making it consistent with the C++ interface
Removed GUI XML loading from Camera::Init call to speed up initializing speed
Removed unused/unnecessary NodeMapRef.h in Spinnaker GenAPI module
Renamed ManagedImage DataSize to BufferSize
GEV device ID stays the same regardless of IP address and gateway
MVA support removed in 4.0
Dropped official support for windows 7
Rebranded to Teledyne in installer, registry and documentation
FLIR_GenTL_v140.cti producer renamed to Spinnaker_GenTL.cti
Renamed InterfaceImpl::IsInUse() to IsCameraInUse()
Cleaned up stream mode node names
Disabling of GEV discovery now persists across Spinnaker relaunches
Default stream mode is now Teledyne GigE Driver which provides a more stable GEV streaming performance compared to our legacy Light Weight Filter Driver
Reset device takes slightly longer (could result in errors logged in the background)
Loading Camera XML from cache instead of loading from camera all the time to improve initialize time
Renamed FilterDriverStatuseEnum to FLIRFilterDriverStatusesEnum
Network adapters configured to be in the same subnet range will now report as IP conflict error and cameras will not enumerate properly in this setup
Initial GEV enumeration will be slightly slower for up to 6 seconds

Enhancements

Added support for new Teledyne GigE Driver
Updated support for FilterDriverStatus TLInterface node status
Added library system node support to enable auto assign IP
Updated AcquisitionMultipleCameraRecovery example to recover when cameras are reconnected
Updated all the Acquisition example to demonstrate selecting different stream modes
Improved admin privilege prompt in the windows installer
Added a shortcut link in the Linux/MacOS installers to point to public Github examples
Improved wrong IP/Subnet detection and avoid LLA settings with more than 1 camera
Improved GetImageSize definition for Image class
Added support for GenTL allocated buffers
Updated Copyright Year in README
Updated Linux Documentation
Added recommendations for tuning Jetson platform for better GEV performance on Linux
Added support for specific camera serial logging
Cleaned up documentation for various examples
Optimized SpinView_WPF GUI updates when chunk is enabled
New environment variable added by the windows installer to point to Spinnaker installed path
Added notification for interfaces with Discovery Off in SpinView_WPF
Updated GetDeviceID header description
Updated Linux README with instructions to set 5G Link speed permanently
Added new Spinnaker Programmer's Guide for C++ and Python
Added documentation for good gige network practice in Spinnaker 4.0
Added support for explicitly blocking windows 7 installation on windows
Added support in windows installer to prompt for PC reboot after uninstallation

Resolved Issues

Fixed issue where SpinView doesn't update USB Cameras in Device List After GigE Firmware Update
Fixed issue where SaveToAvi example produces warning in output
Fixed issue where documentation from Spinnaker Toolbar not opening on Jammy ARM and X64
Fixed issue where camera initialization causes other USB devices to reset in linux
Fixed issue where Planar camera cannot stream with compression off
Fixed issue where converting image with chunk data enabled to BGRa8 fails
Fixed issue where an error reading XML shows up in SpinView when trying to initialize a GEV camera
Fixed issue where ARM installer fails without qt5-default
Fixed issue where multiple Spinnaker instances running interferes with each other
Fixed issue where Spinnaker examples missing when installing with non-default path
Fixed issue where error appears when running SpinSimpleGUI_DirectShow
Fixed issue where Planar Example is missing project files in Examples 15/17/19/22 .sln file
Fixed issue where Linux Spinnaker Documentation symlinks don't work
Fixed issue where AdapterConfigGUI auto fills the same IP Address to Multiple Interfaces
Fixed issue where Linux jammy arm64 installs gcc9 instead of gcc11
Fixed usability issues with installer and GUI
Fixed memory leak in Spinnaker
Fixed Lumenera USB camera streaming issues on Linux
Fixed issue where SpinView_Qt Linux cannot stream Planar
Fixed SpinUpdate incorrectly reporting "Old before obsolete" error
Fixed issue where new Lumenera Lt-C6480 cameras show up as Unknown in Spinnaker
Fixed issue where SpinView_QT doesn't always refresh after Force IP
Fixed issue where Forge stops sending image in Spinnaker if Buffered Burst = On and Frame Rate is set higher than the link bandwidth
Fixed script error when Launching .chm Documentation
Fixed stability issues related to SpinView_WPF

Known Issues

Teledyne DALSA GenICam component not being uninstalled after uninstalling Spinnaker 4.0
Unable to run cross development 32-bit Spinnaker installed by 64-bit installer on 64-bit machine
GevSCPSBigEndian is always set to false when enumerated in Spinnaker 4.0
Lossless compressed image cannot be decompressed properly in Spinnaker 4.0
Windows Defender could cause installation and uninstallation issues

Spinnaker SDK – 3.2.0.62

Enhancements

Updated Spinnaker README and copyrights
Updated Windows installer deprecation notice
Updated PGRLWF driver to support device specific error codes for Pleora cameras

Resolved Issues

Fixed issue where mismatching subnets and IPs between camera and interface caused cameras to not show up in SpinView
Fixed issue where documentation from Linux SpinView_QT Toolbar did not open properly
Fixed issue where Linux installer didn't remove previous installed environment variables properly
Fixed memory leak issue that could result in boost destroy mutex failure errors
Fixed issue where Linux SpinView_QT did not update feature tree properly with latest node values
Fixed issue where Linux SpinView_QT highlighted checkboxes could still be toggled when the node is locked
Fixed Mono10 pixel format conversion support
Fixed issue where SpinUpdateConsole failed to update the serial number successfully

Spinnaker SDK – 3.2.0.57

Enhancements

Deprecated Intel based hardware for MacOS in preparation for Apple Silicon transition
Improved tracking of GEV camera connections on Linux/MacOS
Added support for GenTL allocated buffers
Added support for on-demand disabling/enabling of GigE camera discovery
Optimized SpinView_WPF GUI updates when chunk is enabled

Resolved Issues

Fixed stability issues related to SpinView_WPF on Windows
Fixed stability issues related to SpinView_Qt on Linux
Fixed issue where multiple Spinnaker instances running interferes with each other
Fixed Lumenera USB camera streaming issues on Linux
Fixed memory leak in Python GetNextImage on timeout
Fixed issue where ARM installer fails without qt5-default
Fixed issue where new Lumenera Lt-C6480 cameras show up as Unknown in Spinnaker
Fixed broken links in documentation
Fixed memory leak in Spinnaker
Fixed issue where EnumerationEvents example shows inconsistent camera on wrong subnet message
Fixed issue where TLDeviceReset occassionally fails for U3V cameras
Fixed a potential hanging issue in the windows installer
Fixed issue where saving certain polarization processed images in PNG/TIFF results in dark images
Updated PySpin Documentation version
Fixed issue where planar images cannot be converted
Fixed issue where GEVPayloadType 0x4001 was not mapped properly
Fixed streaming issues with Lumenera LT-M4430
Fixed issue where U3V cameras WriteMem wasn't waiting for pending acks correctly
Cleaned up SpinUpdateConsole console messages
Fixed issue where GEV camera heartbeat incorrectly timing out when PC time is changed
Fixed issue where initializing U3V camera on Linux causes other USB devices to reset

Spinnaker SDK – 3.1.0.79

Enhancements

Added AcquisitionUserBuffer_CSharp example to the windows installer
Added NPS survey dialog to SpinView_WPF to collect user feedbacks
Added Windows installer shortcut link to point to public Github examples
Updated examples to run with Dalsa and Lumenera cameras
Added Surveymonkey/GitHUB Example/Forum URL links to our examples source code
Updated PySpin documentation version
Added support for CPU Affinity and RSS service logging for Google Analytics
Added default projects and solutions for VS2017, VS2019 and VS2022 to improve out of box experience

Resolved Issues

Fixed issue in Spinnaker library where stream could intermittently abort if waiting on triggered images
Fixed issue in PGRLWF where filter driver may crash when streaming GEV2.0 streams
Fixed issue where TLDeviceReset fails for U3V cameras
Fixed issue where disconnecting initialized cameras on the same interface crashes SpinView_WPF
Fixed issue in SpinView_WPF where configuring Heatmap Gradient is not showing up after right click
Fixed issue in SpinView_WPF where images in certain Polarization Methods save as a Black Image in PNG/TIFF formats
Fixed issue where camera disappears from interface after changing or forcing IP
Fixed issue where planar camera images cannot be converted
Fixed issue where GEV 2.0 image extended chunk data is not being reported correctly in the Spinnaker Image Payload Type
Fixed and issue where setting GEV camera to the same IP address does not work
Fixed Spinnaker Linux installer README error for setting IP addresses in JumboPacket section
Fixed SpinView_WPF Getting Started Documentation Linking to C++ API Doc
Fixed an issue where BFS-PGE-16S2 (imx273) displays an artifact when streaming with LLC enabled
Fixed an issue where start streaming faisl after reconnecting U3V cameras on Linux/MacOS
Fixed issue where Spinnaker C# API Environment.OSVersion.Version did not include major version 10
Fixed issue where Spinnaker does not install on Windows 7
Fixed Transport Layer DeviceForceIPWithParams and InterfaceForceIPWithParams failing on GEV cameras due to missing camera after forcing IP
Fixed issue with image buffer size calculation to reduce the amount of memory required to stream a camera
Fixed Windows 7 C# crash on system launch
Fixed google analytics datasource tracking for AdapterConfig
Fixed issue where EnumerationEvent example does run properly
Fixed issue where packet resend was not working properly
Fixed issue where SpinView_WPF may hang when streaming with GEV cameras
Fixed issue in SpinView_WPF where stretch-to-fit doesn't stretch on initial launch of window
Fixed issue in SpinView_WPF where Dynamic status bar doesn't update after some time
Fixed issue where CSharp examples can't be ran on windows 7sss
Fixed issue in SpinView_WPF where device list does not Refresh after U3V Camera Removal
Fixed issue in SpinView_QT where warnings are shown in terminal when disconnecting/connecting a GEV camera
Fixed issue where setting persistent IP on multiple camera through SpinView_WPF only applies to the first camera
Fixed issue where AdapterConfigGUI sets RSS to CPU 0 but displays setting to CPU 1
Fixed issue in SpinView_QT where device list does not Refresh after U3V Camera Arrival
Fixed issue where AcquisitionMultipleCameraRecovery example does not receive removal event on some machines
Fixed issue in SpinView_WPF where setting Force IP with no persistence is not working
Fixed issue where Spinnaker 3.0.0.118 x64 fails to install when GigE option is selected
Fixed issue where Spinnaker 3.0 fails to install if not ran as administrator
Fixed issue where image decompression incomplete status is not being propagated to the user correctly
Fixed issue where Dalsa camera FPS reports 0 in SpinView_WPF status bar
Fixed issue where Spinnaker installer has no title in Taskbar
Fixed issue where switching driver through SpinView_WPF is not working
Updated and signed installers and executables with new digicert certificates

Known Issues

Issue starting stream with the Dalsa LT-C/M4430, LT-C/M5470, LT-C/M6480 USB3 Vision Cameras

Spinnaker SDK – 3.0.0.118

Breaking Changes

Refactored interface event handler to return CameraPtr instead of int serial to properly support devices with string serials
Refactored system event handler to return InterfacePtr instead of string interfaceID for improved usability
Updated Spinnaker C++ enums with SPINNAKER prefix to avoid name conflicts with other library enums
Removed support of VS2010/VS2013
Removed deprecated TLStream StreamBufferCountMode Auto option
Removed deprecated TLStream GevTotalPacketCount, GevFailedPacketCount, GevResendPacketCount, StreamFailedBufferCount and GevResendRequestCount nodes
Cleaned up event registration/unregistration API names and functionality
Updated SpinVideoC structs (spinAVIOption, spinMJPGOption, spinVideoOpenUncompressed, spinVideoOpenMJPEG)
Remove deprecated Image post processing functionalities from Image Class
Removed support for Python 2.7

Enhancements

Added support to display chinese characters properly in AdapterConfigGUI
Added RSS configuration support to AdapterConfigGUI / AdapaterConfigConsole
Added CPU affinity service configuration support to AdapterConfigGUI / AdapaterConfigConsole
Updated console usage description to describe sequential update in SpinUpdateConsole
Added gev_nettweak bash script to help configure system/adapter settings on Linux
Updated descriptions for TLStream StreamLostFrameCount and StreamDroppedFrameCount
Added support in SpinView_WPF to detect 5/10G cameras and spawn popup to recommend best setup practices
Added support for refreshing nodemap nodes in all SpinView_WPF tabs
Updated use of boost library from version 1.60 to 1.79 on all supported OS
Cleaned up examples on the use of GenICam IsReadable, IsWritable usages
Updated AdapterConfigGUI to support configuring Interrupt Moderation
Updated AdapterConfigGUI to support disabling of multimedia service scheduler
Updated installer to support disabling of multimedia service scheduler
Added support for streaming Teledyne Lumenera USB camera on Linux
Added support to update camera out of updater/monitor mode in SpinView_WPF
Updated FLIR GenTL producer to return chunk images as PAYLOAD_IMAGE_TYPE instead of custom types to work with other GenTL consumers
Added support for Python 3.10 for Windows and Linux
Improved performance of PGRLWF grab logic to only poll for images when buffers are available
Added minimal support for GEV 2.0 Image and Chunk Image payloads on Windows and Linux
Added Transport layer Device DeviceReset option
Exposed Device Reset functionality in SpinView_WPF
Improved efficiency of GEV device discovery by caching interface ID status
Added support for reporting block ID missing in the StreamLostFrameCount
Added support for FLIR G600a camera in Spinnaker

Resolved Issues

Resolved issue where AcquisitionMultipleCameraRecovery may not receive removal event on some systems
Resolved issue where device list does not refresh after repeated U3V Camera Arrival on SpinView_QT 3.0.0.116
Resolved issue where device list does not refresh after U3V Camera Removal on Windows SpinView_WPF 3.0.0.115
Resolved issue where warnings are logged when disconnecting/connecting a GEV camera in SpinView_QT 3.0.0.115
Resolved issue where device force persistent IP on multiple cameras only applies to the first camera in SpinView_WPF
Resolved issue where AdapterConfigGUI RSS is set to CPU 0 when displaying CPU 1
Resolved issue where Streaming window/features pane does not close after pressing the disconnect camera button in SpinView_Qt
Resolved issue where SpinView_WPF still debayers the image when select to save as raw images
Resolved issue where Spinnaker library cannot save raw bayer pattern images in PGM file format
Resolved issue where SpinView_QT crashes when changing Acquisition Mode for Dalsa Camera on MacOS/Ubuntu
Resolved issue where Spinview_WPF 2.6 and 2.7.0.128 saves much fewer images than acquired
Resolved issue where EnumerationEvents example hangs after disconnecting GEV camera
Resolved issue where Device list does not refresh after camera arrival/removal on Linux SpinView_Qt
Resolved issue where error messages are logged during SpinView_Qt startup on Linux x64
Resolved issue where saving current image to disk while streaming on U3V Cameras causes SpinView_Qt to become unresponsive
Resolved issue where double clicking camera on SpinView_Qt does not start streaming the camera
Resolved issue where CPU affinity service is not running
Resolved issue where Stream Incomplete Packet Count counter reports incorrectly
Fixed issue where File Access tab not available in QT unless camera is clicked twice
Fixed issue where FLIR A400 thermal camera throws timeout exception after specific number of frames
Fixed issue where camera Init() fails with "Could not read XML from device at address" when using various locales
Fixed issue where packet counters reports wrong values in Linux
Fixed issue where USB enumeration in SpinView_WPF may show duplicate entries
Fixed issue where AdapterConfigConsole execution is not returning automatically
Fixed issue where Spinnaker 3.0.0.71 on MacOS fails when selecting Spinnaker Python in the installer
Updated pyspin examples to use new struct names changed in 3.0
Fixed issue where SPINNAKER_EVENT_BUFFER_LIST registration wasn't handled properly
Fixed issue where SpinView_WPF crashes when doc folder does not exist
Fixed issue where File Access tab not present on Spinview for Dalsa/Lumenera Cameras
Fixed issue where disconnecting Dalsa/Lumenera camera while streaming does not close Streaming/Feature Window on SpinView_WPF
Fixed issue where "Optimize camera frame rate" fails for Lumenera/Dalsa cameras
Fixed issue where Lumenera & Dalsa Camera Serial Number shows up incorrectly in SpinView_QT on Linux/MacOS
Fixed issue where uploading firmware file through File Access fails on SpinView_QT for Lumenera/Dalsa cameras
Fixed issue where AdapterConfigGUI doesn't check whether RSS is supported on selected NIC
Fixed issue where Teledyne Genie Nano camera image timestamps are reported by the SDK inaccurately
Removed AdapterConfig.h from documentation since it's not included with the SDK
Fixed issue where Stream Dropped Frame Count does not reset between streams
Fixed issue where FileAccess_QuickSpin example doesn't run properly with BFS Cameras
Fixed issue where python example enum names needs to be updated after 3.0 naming changes
Fixed issue where AcquisitionMultipleThread was not initializing nodemap in the correct place
Fixed issue where camera gets stuck and reports "Unable to set DeviceAccessStatus to Read/Write"
Fixed issue where OnDeviceArrival/OnDeviceRemoval not working without ImageEvent enabled
Fixed issue on Linux where Packet Resend Enable is always enabled after starting streaming
Fixed issue where ImageFormatControl_QuickSpin C++ example fails on MacOS and ARM platforms
Fixed issue where library crashes when 2 GigE cameras are unplugged at the same time
Fixed crash with SpinUpdateConsole_v120.exe in 2.7.0.128
Fixed issue where pixel values (RGB) is not updating properly in SpinView after 2.5
Fixed issue where auto force IP on more than 2 cameras fails in GigEConfig utility
Fixed issue where streaming 2 or more cameras in AcquisitionMultipleThread example reports segmentation fault
Fixed issue where Firefly DL cannot stream with chunk data enabled
Fixed issue where camera crashes during de-initialization when log event handler is registered
Fixed issue where SpinView_WPF polls for chunk data even if camera is not sending out chunk images
Fixed issue where PGRLWF handles buffer starvation by prioritizing sending out complete images instead of sending out partial images right away when buffer becomes available
Fixed issue where FLIR GenTL producer doesn't return correct file name with extension for URL_INFO_FILENAME
Fixed issue where deadlock and/or delay found while grabbing images with a modified ImageEvent_CSharp example using MVA stream mode

Spinnaker SDK – 2.7.0.128

Enhancements

Updated SpinView_WPF about dialog license and year
Updated SpinView_WPF to display individual stream channels for planar pixel format
Updated SpinView_WPF recording dialog to fit lower resolution displays
Updated lossless image decompression pipeline to return partially decompressed images
Added SpinnakerNET, SpinnakerC and PySpin for ImageProcessor classes
Added support for interleaved planar images to preserve chunk data
Updated Planar example to support chunk data
Added GEV 2.0 packet resend and 64bit block ID support on Linux
Updated Planar and PlanarUtility to use Byte per second for data rate values
Deprecated vs2010/vs2013 in Spinnaker
Deprecated image post processing methods in the Image class
Added support in windows installer to disable Myricom driver installation when the option to use GEV cameras is disabled
Updated EnumerationEvents examples to demonstrate the SystemEvent feature
Enhanced SpinView’s user error pop up
Added support for differentiating between Golden Image vs Updator Camera
Updated package redistribution requirements for MVA/Spinnaker
Improved debug logging for USB camera enumeration
Added chunk data acquisition support in Windows/Linux drivers
Added chunk data support for serialization
Updated support for GetNextImageSync() and GetNextImage() API calls for single/multi-stream cameras
Added support for ImageList event handling in Spinnaker, SpinnakerC and SpinnakerNET
Added support for synchronized planar image list capture in SpinnakerC and SpinnakerNET
Optimized device event handling to re-use threads instead of spawning new threads all the time
Added SpinnakerNET support for enabling/disabling IgnoreCache while reading camera nodes
Cleaned up and improved Spinnaker and GenTL logging messages
Added support for synchronized multi stream image retrieval
Added support for Spinnaker Image cross platform serialization
Added support for compressed payload size validation in PGRLWF and Linux acquisition engine
Added support for configuring multiple stream Nodemaps
Introduced ImageProcessor to support ImageList conversions
Added support for JPEG12 image decompression and conversion
Added support for post process planar image interleave
Added support for image post process gamma adjustment
Added Planar example to demonstrate planar related features

Resolved Issues

Fixed issue where VB and C# Example cannot run in Debug x64 VS2010 and VS2013
Fixed issue where ImageEvents python3 example fails to convert due to incorrect use of variable
Fixed issue where Planar Example Fails to Set MaxDatarateThreshold Due to Step Size
Updated Buffer Handling example to reflect changes to OldestFirstOverWrite mode behavior
Fixed issue where Python examples failing due to 'ImageProcessor' object has no attribute 'SetColorProcess'
Fixed issue where SaveToAvi_C example had incorrect spinImageProcessConvert arguments passed specified
Fixed issue where Spinnaker vs2010 and 2013 examples can't be built in Release x64 or x86
Fixed issue where Inference_CSharp example post build copy fails
Fixed issue where Device Driver Version shows Unknown for USB Cameras
Fixed the title of SpinSimpleGUI_WPF_v140.exe and SpinPixelCorrection
Fixed incorrect serial number and model name shown in SpinPixelCorrection
Fixed SpinView_WPF stream ID listed in Footer extra spacing
Fixed SpinView_WPF copy node description
Fixed SpinView_WPF "Error saving image file on copy"
Fixed error logging in Acquisition_C example to show proper no wrong subnet message
Fixed exposure example to run good known settings for BFS-PGE-120S4C
Fixed the output path in csharp examples from premake intermediate directories to the bin folder
Fixed issue where color channels are swapped in a H264 recording
Resolved issue where GenTL is installed when EULA is declined
Resolved issue where GEV Cameras in Updater Mode is missing '!'
Resolved issue where Exposure end event cannot return with long trigger interval
Resolved issue where SpinView_WPF shows empty tooltip
Resolved issue where the SDK failed to stream Thermal Cameras at expected framerate
Resolved Crashing Upon Second Acquisition
Resolved issue with the acquisition engine for jpeg/planar
Planar example with events may run into loading issues due to small indexing bug in example
Making sure ImageEvents_CSharp example is consistent with the C++ and C examples
Removed unsupported ActionCommand example in Example solution
Fixed issue where single plane JPEG12 conversions to BGR8 resulted in darker image
Fixed issue where converting to Mono Packed12 pixel format would result in a crash
Fixed issue with MVA multiple stream crash by protecting simultaneous accesses to each stream handle
Fixed converting JPEG12 image to RGB16/BGR16 and Mono16
Fixed converting from BayerRG16 to BGR16
Fixed missing header includes for compiling Planar example
Fixed memory access violation when converting ImageList with insufficient image data or duplicate data
Fixed down-sampling of 12bit image to 8bit so we don't lose significant data
Fixed issue where issuing DeviceReset causes Spinnaker to hang on Linux
Fixed issue where streaming planar pixel formats in SpinView_WPF crashes

Known Issues

SpinView_QT crashes while recording a video with a planar camera
SpinView_QT crashes while streaming a planar camera on Linux for some time
Planar example with events may run into loading issues due to small indexing bug in example
Error converting JPEG12 to RGB16/BGR16 and Mono16
Converting from BayerRG16 to BGR16 fails
Planar example with events may run into loading issues due to small indexing bug in example
SpinView_WPF displays random planes from different streams so flickering may be observed
Serializing images to disk may encounter the Windows max number of files per folder limit
Software crashed when post processing around 70,000th image
Chunk data is not supported yet with Image serialization
Packet resend is not supported yet with the Planar JPEG pixel format
GetNextImage() no longer supports multi stream cameras. GetNextImageSync() should be used instead.
GetNextImageSync() is not supported for single stream cameras
Converting planar JPEG12 to BGR16/RGB16 is supported only with IPP color processing method
Converting planar JPEG12 to Mono16 results is not supported yet

Spinnaker SDK – 2.6.0.160

Resolved Issues

Fixed regression issue where thermal cameras cannot stream at expected framerate (Linux)
Fixed issue where Exposure end event cannot return with long trigger interval
Fixed issue where GEV cameras in updater mode are not detected properly

Spinnaker SDK – 2.6.0.157

Resolved Issues

Fixed regression issue where ImageEvent_CSharp can only capture one image
Fixed regression issue where non FLIR cameras do not enumerate properly due to updater status check
Fixed issue where updater status isn’t being checked properly for FLIR cameras

Spinnaker SDK – 2.6.0.156

Enhancements

Added more Google Analytics related to "Problem initializing Render Bitmap" issue
Added support in AutoConfigGui for Intel 540 and Intel 550 10G adapters
Added support in the library to expose USB interface friendly name as display name on Windows
Cleaned up device list displaying long USB interface names which was difficult to read
Added logging of camera serial number when missing packets are reporting during streaming in Spinview
Modified SpinSimpleGUI_WPF example to make use of image events
Added support to keep camera enumerated as long as camera is still streaming
Updated web documentation to reflect the latest software production release
Add support for enabling/disabling generation 2 camera models in Spinnaker
Package log4cpp.gentl.property in installers
SpinUpdateConsole support for rebooting cameras stuck in golden image or updater mode without reprogramming firmware
Improved thread usages for enumerating GigE cameras and adapters on Linux
Improved thread usages for enumeration GigE cameras and adapters on windows
Enable Spinnaker to be installed through SSH on MacOS
Enabling Dalsa GigE camera support in Spinnaker
Enabling Lumenera USB camera support in Spinnaker
Extended C# Inference example to include features such as model upload
Updated PGRLWF to version 2.7.3.507

Resolved Issues

Fixed continuous file handle increasing issue when GEV device enumeration is enabled
Fixed incorrect releasing of buffers when grabbing with NewestFirst buffer handling mode
Fixed library hanging issue on Linux when a device reset is issued to camera
Resolved TLDevice DeviceIsUpdater node not returning latest updated value
Resolved issue where SpinSimpleGUI_WPF cannot stream/init camera
Resolved issue where SpinView errors out when closing streaming window or when streaming with multiple cameras
Resolved issue where Histogram doesn't work in SpinView
Cleaned up error of -1012 logging message after EndAcquisition() is called when image event is configured
Resolved issues with playing high resolution "Uncompressed" and "MJPG" videos
Fixed Linux preinst script undefined function usage and incorrect exit codes returned
Fixed spinnaker console errors shown when camera disconnects in AcquisitionMultipleCameraRecovery
Fixed footer information missing when streaming using U3V camera in SpinView_Qt
Fixed issue where image buffers are not requeued to the driver properly depending on timing of when image is released
Fixed errors and SpinView_WPF from crashing when configuring IP
Fixed incorrect counting of retransmitted packet and retransmit request in PGRLWF driver
Fixed image drawing issue in SpinView_Qt for embedded Linux platforms
Removed ActionCommand example from Spinnaker SDK

Spinnaker SDK – 2.5.0.80

Enhancements

Packaged PgrLwf 2.7.3.507 that fixes stream diagnostic counters
High CPU usage found when streaming with MVA stream moderesolved with new MVA 2.0.5.577 driver
SpinView support for displaying node values properly depending on region
Iterative improvement to CCM based on customer feedback
MVA library support to automatically detect and use MVA stream mode
MVA driver description support in API
MVA installer support
MVA Documentation updates
MVA Packet resend support
MVA counter support
MVA PySpin installer support
MVA Harvester support
MVA SpinView support
Spinnaker redistributing documentation update for MVA
Spinnaker expose interface description as the interface display name
Update PgrLwf driver to version 2.7.3.486

Resolved Issues

IP Configuration in SpinView_WPF causes error and shuts down
Spinnaker Installer fails to install on x86 machine
Error and Warnings compiling examples on macOS
SpinView_WPF crashes when drawing window closed while streaming
SpinView_WPF error when closing drawing window before everything is loaded
Cannot stream three cameras at the same time in SpinView_WPF
SpinView_WPF becomes unresponsive after multiple start/stop
SpinView_WPF freezes sometimes after several Start/Stop device acquisition
No OnImageEvent after running a while with Spinnaker 2.4.0.144
SpinView on Jetson Nano unable to show image data in the drawing window.
Cannot install 2.4.0.143 on Jetson Nano bionic - QT library failure
Spinnaker 2.5.0.75 SpinView_QT - Footer information missing when streaming using U3V camera
ImageUtilityCCM not packaged in Linux installer (2.5.0.75)
LLC convert failed issue in SpinView with more than one camera
When initializing SpinnakerGUI object in win32 app, an unhandled exception occurs.
Search description doesn't enumerate all nodes with specified text
SpinView_WPF 'Set Current and Persistent IP' throws exception
Unable to perform firmware update when camera is in monitor mode
Can't Build Compression Example in vs2010 x86 Configurations
Compilation Warnings in 2.4.0.143 Examples
Error -1010 when trying to disable heartbeat with Spinnaker v2.4.0.44 and 2.4.0.110
StreamBufferCountMax seems to be incorrect on ARM boards
Typo in TLDevice DeviceEndiannessMechanism node
Transfer Queue Overflow Count easily increases when refresh manually
Spinnaker Python can't extract polarization quadrant image
Instructions for installing PySpin on TX2 carrier board platform
SpinView crash with insufficient system resource

Known Issues

SpinSimpleGUI_WPF example cannot initialize and stream camera properly
No missing Myricom license error when license removed until you reboot or disable/re-enable adapter
StreamMode does not persist after closing SpinView
Myricom card occasionally not detected by the Operating System after reboot
MVA floating image found when system CPU usage is high or when Spinnaker is pinned to a single process
High CPU usage found when streaming with MVA stream mode
Incomplete images found during streaming of two ORYX cameras with MVA card when CPU usage is low
Spinnaker 32bit installer fails to install on 32bit OS
MVA floating image found when system CPU usage is high or when Spinnaker is pinned to a single process

Spinnaker SDK – 2.4.0.144

Resolved Issues

Error -1010 when trying to disable heartbeat with Spinnaker v2.4.0.44 and 2.4.0.110

Spinnaker SDK – 2.4.0.143

Enhancements

Initial Lossless Compression support
SpinView_WPF stream window footer for image info does not update immediately
Spinnaker requires admin privilege to access FLIR_GENTL64_CTI_VS140 system variable
TestSweepMTU fails on Win10x86 and Win10hp GEV
TestEventsEnumeration/InterfaceEventsAfterReconnection Failing Due to Wrong Exception
blocking GetNextImage no longer throwing exception when EndAcquisition is called
Spinnaker debug build FLIR_GenTLd_v140.cti missing in the latest sdk version 2.4.0.110

Resolved Issues

SpinView_WPF stream window footer for image info does not update immediately
Spinnaker requires admin privilege to access FLIR_GENTL64_CTI_VS140 system variable
TestSweepMTU fails on Win10x86 and Win10hp GEV
TestEventsEnumeration/InterfaceEventsAfterReconnection Failing Due to Wrong Exception
blocking GetNextImage no longer throwing exception when EndAcquisition is called
Spinnaker debug build FLIR_GenTLd_v140.cti missing in the latest sdk version 2.4.0.110
LLC Decompression performance benchmarking
Add compressed image support for image saving test
Giant Logs Produced in Test Suite Long On Failure
Add compressed image support for image conversion test in C/C#/Python
Support reading inference results in device events
Add multithreaded decompression correctness test (C/C#/Python)
GenTL Linux should simply be loaded from hard coded installation path if env not found
Add test for saving/loading chunk data to/from a file (C++)
Introduce CRC check in compression example
Error acquiring system instance when SpinView is launched
BFS-U3-16S2M-BD1 Exposure time fluctuates in SpinView
Error message when grabbing image from camera using LLC
Images are not received properly when compression enabled on Linux
Firmware selection dialog in SpinView does not open for cameras in updater mode
Memory leak with trigger_C using software trigger
AcquisitionMultipleCamerasWriteToFile returns 1 when success

Spinnaker SDK – 2.4.0.110

Enhancements

Ubuntu 16.04 Removal
Package new PGRLWF driver
Change Spinnaker's registry key location from "Point Grey Research, Inc." to "FLIR Systems, Inc."
Spinnaker DirectShow API support
Add DirectShow GUI streaming example to installer
Use system installed Qt to build Spinnaker (Linux)
Stop packaging Qt in Linux installer
Clean up Image Converter for better multi-platform support
Improve OnImageEvent callback performance
Improve SpinView_WPF convert/display loops
USB3 port information implementation
Cleanup SpinView_QT console log output
Document Spinnaker Support Policy in SDK
Add setup details to SerialRxTx description
Clean up install locations for licenses on Linux
Allow SpinUpdateConsole to update multiple cameras sequentially provided firmware path
Improve manual buffer max calculation
Retrieve camera serial number from event logging
Implement GenTL DataStream Modules Error Event handling (Windows)
Add MultipleCameraWriteToDiskEx to installer
Remove HighDynamicRange example
Remove GenTLInfo_QuickSpin examples
Remove c-style casts in Spinnaker
Remove deprecated spinnaker.ini
Deprecate use of GTKmm

Resolved Issues

Image clean up fails with EventData failure on platform with limited memory
DeviceForceIPWithParams and InterfaceForceIPWithParams failing on all platforms
Spinnaker Linux install may fail due to logname
SpinView_WPF Runtime error - R6025 Pure virtual function call
Installing multiple versions of Spinnaker results in only the newest version is runnable by default
Environment variables are not installed properly
Device appears as not streaming in device window when it is
GigE Cameras Still Enumerate When Installed Without Enabling GigE Devices 2.3.0.74
SpinView_QT - "Could not load producer" even with FLIR_GENT64_CTI set
SpinView_QT Crashes When Exiting
SpinView_QT Crashes when third party U3V cameras are connected
SpinView_Qt Color Processing Method "IPP" should be grayed out for ARM and macOS
SpinView QT could not read inference class label file
Setting Gain in SpinView_Qt causes weird rounding
Color Processing Methods is Enabled For Mono Cameras In SpinView_QT
Qt shared files which Spinnaker installed conflict with original Qt shared files.
Fix Spinnaker windows warnings
"Buffer Underrun" error message should be "Buffer Overrun".
ActionCommand example shows error on MacOS
Video Recording still exists in Linux ARM GUI
Running -auto in AdapterConfigConsole/GUI updates the IPs even the original IPs are valid
ActionCommand example encounters error waiting for EventData on NEW_BUFFER_DATA event
SpinView_WPF "Update Device Firmware" pop-up takes 2 clicks to close
AdapterConfigGUI No warning with non-empty default gateway
Spinview_WPF "Sort by" options generates a new list of cameras
Python3 wheels on macOS report that they are for macOS 10.09 instead of 10.14
SpinView - Camera name too long for the wrong subnet icon
GenTL payload types do not match the GenTL spec
System ReleaseInstance and then GetInstance results in System Instance not initialized
Weird Large Context menu displayed in SpinView_WPF for USB cameras
SpinView_WPF throws an error when closing with a camera initialized
Disconnect Button on Device Pane (SpinView_WPF) Not Visible By Default
Survey pop-up showing up multiple times
SpinView_WPF Device List doesn't update while survey pop-up is active
Incorrect file title formatting for Spinnaker install package files
Unexpected SendTo error when streaming GigE cameras
BFS-U3-200S6C doesn't work reliably on RaspberryPi4
Node map not being updated after device event call back
SpinView_WPF stopping stream before first image is displayed produces exception
SpinnakerNET library documentation missing in CHM
Tool-tip does not clear
Spinnaker 2.2.0.48 debian/control/shlibs file misconfigured
Spinnaker header files generate with the wrong copyright year
Mixing debug/release or MSVC compiler versions leads to crashes when passing STD containers in Spinnaker DirectShow
SpinView_WPF Error on Device List Refresh
Issues with cleaning up SystemPtr
GevTotalPacketCount node does not update properly after stream reset on non-Windows machines
spinnaker 2.2.0.48 memory leak ubuntu 18.04
Warnings found compiling Enumeration_C_QuickSpin on MacOS
DeviceReset failing after resetting device (GEV)
boost::mutex::~mutex(): Assertion `!res' failed at system->ReleaseInstance();

Spinnaker SDK – 2.3.0.77

Enhancements

Remove xenial (Ubuntu 16.04) support
Feedback link not provided in Spinnaker Linux install through SSH
Integrate latest version of PGRLWF driver

Resolved Issues

Spinnaker Linux install may fail due to logname
Device appears as not streaming in device window when it is
GigE Cameras Still Enumerate When Installed Without Enabling GigE Devices 2.3.0.74
SpinView_QT - "Could not load producer" even with FLIR_GENT64_CTI set
SpinView_QT Crashes When Exiting
Backport potential USB enumeration crash fix (SDK-5675)
Spinnaker Saves H264 Videos only at Frame Rates of Integers
LogicBlock on ARM64 not getting 2 consecutive images triggered
DeviceForceIPWithParams and InterfaceForceIPWithParams failing on all platforms
SpinView_WPF Runtime error - R6025 Pure virtual function call
Installing multiple versions of Spinnaker results in only the newest version is runnable by default
Environment variables are not installed properly
Spinnaker 2.3 AIK can not load
Unit missing in SpinView Settings Page
Unable to Compile BufferHandling example on MacOS
SpinView_WPF buffer nodes do not update when streaming
Memory usage keeps increasing when executing Single image acquisition in SpinView
Python3.7.8 can't load PySpin on macos
SaveToAvi.py and ImageChannelStatistics.py Packaged with PySpin on Arm64
32-bit Spinnaker can't queue buffers for Oryx IMX530 with Mono16
Domain error while installing libspinnaker_2.0.0.147_arm64 version
FLIR GenTL Logging API doesn't conform to proper C style interface
Update README_ARM for 20.04
Issues with Unregistering events on DeInit with debugger
Trigger warning note missing in Trigger_VB Example
Unavailable Files in Examples_vs2015 Solution
Exception when disconnecting camera in SpinView_WPF
Unable to load CTI when ran with sudo after clean installation (Linux)
Ini files not removed on uninstall macOS
Packages not found for SaveToAvi and SaveToAvi_C for Linux x64 Ubuntu 20.04 with Spinnaker 2.2.0.47
Conversion from Mono/Bayer12p formats to Mono/Bayer16 formats, is incorrect
Windows Spinnaker Installer fails to set environment variables for CTI files
SpinView_WPF stream freezing when streaming at a high resolution
Deepcopy or create an image doesn't work for Lossless compressed image
Customer can see image shaking when run 2*BFS-U3-51s5 have cameras through hub
Update Node descriptions
Update documentation on what to package to redistribute Spinnaker

Spinnaker SDK – 2.2.0.48

Enhancements

Initial support for Ubuntu Focal (20.04)
Improve 'Incomplete Buffer Warning' with more actionable message
Improve experience on finding out why there are missing packets (SpinView_WPF)
Add disable Auto Gain and Auto WB to SpinView optimize FPS button
Add warning/note to Trigger example related to triggering faster than frame time
SpinView_Qt - Port over Windows Camera Auto IP

Resolved Issues

Fix multiple issues introduced with 2.1 release when using GigE cameras in Windows 7
Bash profile has incorrect line ending
Fix disabling of GEV enumeration
Debug Symbols loaded in Example .sln Files (for .exe files)
SpinView_WPF buffer nodes do not update when streaming
Spinnaker Documentations shortcut does not open the C/C++ pdf on Linux
Unavailable Files in Examples_vs2015 Solution
SpinView_Qt does not link to Spinnaker documentation on Linux
Some paths lost in PATH after installing Spinnaker 2.2.x
GigE camera window in SpinView would close randomly while streaming with a split view of U3V and GigE at max resolution
Resetting Application Settings does not set rendering back to CPU
Lossless Compression - Unable to decompress images with chunk data enabled
UnregisterEventHandler failing with error "No event is registered"
No Command Nodes Available in VisionPro Cognex
usb3 camera segfaults in linux when being accessed in multiple applications
SpinView 2.0.0.146 histogram not working with BFLY-PGE-13E4C bayer pixel formats
EnumerateGEVInterfaces shortcuts do not work unless run as admin
Spinview 2.0.0.146 display pane will reset when startup everytime.
Interfaces appear and disappear from the Interface list on some PCs
Streaming images are not displayed after re-arranging image display panes in SpinView_Qt
endacquisition freezes with image callback registered (Windows)
EnumerationEvents_(C ,CSharp, VB, Python) Doesn't Show GigE Interface Arrival/Removals Correctly
SpinView_WPF log viewer match whole words search is not case sensitive
GigE camera won't initialize after firmware update in SpinView_WPF
After power cycling a GigE camera in SpinView_WPF, device list does not update on its own
SpinView_WPF throws 4 errors when displaying node information with no increments
macos installer pyspin3.6 package packs in pyspin2.7
32bit SpinnakerDirectShow_v140.dll not packaged in 64bit Spinnaker installer

Spinnaker SDK – 2.1.0.95

Enhancements

Introduction of Python 3.8 support
Add handler for SystemEvents to SpinView_WPF
Image pixel format conversion from 10- & 12-bit packed formats to 16-bit
Add system events support for Windows
Update VS2015 C/C++/C# example/premake to support VS upgrades
Update Linux USB DeviceInstanceID to use bus number, device number and ID
Utilities packaged in the installer needs to be added to list of allowed applications to avoid permission prompt
Make location of GenTL producer file (CTI) clear to user
GenTL producer workflow improvements
Use more than MAC address as our Interface IDs
Update AcquisitionMultipleRecovery to handle newly added Interface Arrival/Removal behavior
Refactor SpinView_Qt to register device arrival/removal events onto the system
Handle interface reconnect if InterfaceID stays the same
Reduce # of launches required for Software Survey Pop Up
Refactor Windows/Linux HAL to enumerate with DeviceID instead of DeviceSerial

Resolved Issues

Product versioning showing commas instead of periods for C/C++ Binaries
Boost errors when application using Spinnaker ends
[VERIFY] SpinView_Qt device list becomes blank after an interface has been removed
Multiple GenTL module close calls on same interface will crash GenTL
[VERIFY] SpinView_Qt sometimes crashes on MacOS and Windows when Camera is unplugged
SpinView not responsive when streaming GigE camera on full resolution on ARM64
GenTL ForceIP and setting persistent IP tests fail on Linux
SpinSimpleGUI_WPF : Cannot re-start a camera that was unplugged while streaming and plugged back in with the managed API
"License Agreement was declined" if old Spinnaker version is installed
Update HostControl with new FLIR System paths
Cannot remove interface with camera when using a global camera list
SpinView_WPF misconfigured IP "Configure All" doesn't configure camera or refresh device list
GigE cameras still detected when opting out of GigE During Windows Installation
SpinView_WPF performs poorly with unavailable network
GenTLInfo_QuickSpin (Linux) crashes if GigE camera is on wrong subnet
Configure All Misconfigured IP On SpinView Doesn't Work
System EnumerateGEVInterfaces not read properly during System initialization
SpinView crashes when a camera is unplugged
Windows overnight streaming in SpinView_WPF fails in Spinnaker 2.0.0.144
StreamBlockTransferSize Causes Issues With Grabbing Images on Windows 7
GigEConfig AutoForceIP should loop through DeviceSelector (Linux)
Project GUIDs of some project files have been inadvertently altered
Feedback Dialog In SpinView_WPF is Missing 'Do not ask again' Option
"Camera FPS" is off by a multiple of 8 on slower-tickrate-cameras
Spinview StreamBuffercount mode still defaults to Auto
User should not be able to reuse the same interface handle even if interface disconnects/re-connects with exact same interface id
SpinView_QT (x64_bionic) doesn't run on Spinnaker 2.1
Update Spinnaker Installer to use MSBuild 4.6
memory leak with DeviceEvent
AcquisitionMultipleCameraRecovery example fails in latest Spinnaker
DeviceEvent Event ID and Event Name populated incorrectly
Enumeration Events sometimes hangs when disabling interface with connected devices
SpinView_WPF can't update firmware of a camera in updater mode without power cycling
GEV IP not update when plug in camera after open spinview
spinview qt installer overwriting installed qt libaries
Spinnaker take more CPU usage than Flycapture on GigE camera
RecordH264 test failing with memory access violation
Spinnaker 2.0.0.146 device event has empty event name
Nodemap polling causes UI to lose focus when changing nodes
UnregisterEventHandler failing with error "No event is registered"
Interfaces appear and disappear from the Interface list on some PCs
Windows Spinnaker installer doesn't show documentation checkbox
EnumerationEvents_(C ,CSharp, VB, Python) Doesn't Show GigE Interface Arrival/Removals Correctly
Enable Heatmap Is Still Enabled After Changing Pixel Format
SpinView_WPF Polarization and Color-Processing Methods are Always Available
EnumerationEvents Example Doesn't Show Device Arrivals For GigE
SpinView_WPF Help->Documentation does not include Programmer's Guide
GigE camera won't initialize after firmware update in SpinView_WPF
After power cycling a GigE camera in SpinView_WPF, device list does not update on its own
System event tests with U3V cameras fail on all platforms
Spinview_wpf 2.0.0.146 GUI may hang or taking long time to enumerate cameras when there is some special device in the network
SpinView_WPF (2.1.0.82) Unresponsive When GigE Camera Disconnected During Streaming
endacquisition freezes with image callback registered (Windows)

Spinnaker SDK – 2.0.0.147

Resolved Issues

Spinnaker 2.0.0.146 device event has empty event name
Application version not populated in Spinnaker 2.0.0.147

Spinnaker SDK – 2.0.0.146

Enhancements

Add GenTL producer support
Add analytics into SpinView for experience improvement. No personal data is connected.
Add support for device specific JPEG-LS payload type
Add a method to set zoom level of Display Window in WPF example
Add C++ Chunk Enabled Sequencer Core Test
Add SpinView FFY-DL Pop-up link to resources page
Add pip install enum34 instruction for Python2 in PySpin README
Add Camera FPS counter to Spinview_Qt
Bring up EULA prompt during Linux installation
Spinview StreamBuffercount mode changed to default from Auto to Manual with 10 default buffers
Configure Spinnaker Linux and MacOS to store logs, Transport Layer persistence data and GenICam device XMLs at specific location
Update C# tests with new GetCameraBySerial function
Refactor Spinnaker API functions to use DeviceID instead of serial number
Cleanup System XML
Cleanup stream XML
Cleanup Interface/Device XML
Update MultipleCamera C++ example to handle disconnect with image events
Update Spinnaker with new PGRLWF driver 2.7.3.342
Remove email register page from Win installer
Remove VS2010/VS2013 libs/binaries/examples from Full Windows Installer
Rename GevDeviceForceIP and GevDeviceForceIPEx nodes
Rename Events to EventHandlers
DEPRECATE - Remove legacy polarization methods
DEPRECATE - Remove old GevMaximumResendBuffers node
DEPRECATE - Remove deprecated video recording functions from Spinnaker API

Resolved Issues

SpinView_WPF performs poorly with unavailable network
Fix "Do not show" option to survey request dialog in SpinView
Device arrival/removal events registered on the system gets wiped when interface list changes
Spinnaker PDF documentation do not include html pages properly
Windows - Disabling a network adapter removes all cameras
Sequencer_C Fails to Get Image 3 and Image 5 Error -1011
Fix firmware update getting stuck when camera is on wrong subnet after reboot
Spinview_Qt exits with segmentation fault when app is closed while inference is enabled
USB camera can still be recognized as a FLIR camera after running uninstaller
Linux - log4cpp property files not present in /usr/bin after installation
VisionPro 9.6 BFS-U3 has a timeout error every second when put into trigger mode
Error in calculation of Angle of polarization (AoLP) from "ImageUtilityPolarizationImpl" spinnaker source code
BufferHandling.cpp example not installed for Ubuntu
Auto/ForceIP should use/take device ID instead of serial number
Error when number of buffer is set to 2
SpinView_WPF System context menu shows option to update firmware
Missing Uninstall button when running the installer of its own version
boost::exception_detail::error_info_injector<boost::thread_resource_error exception on RaspberryPi3
Bad lexical cast during GEV discovery for GEV cameras without serial number
Different BFS/GS3 cameras running at different application/threads influence one another
Exposure and Exposure_QuickSpin fails in all languages: Failed waiting for EventData on NEW_BUFFER_DATA event
Missing "Help" entry in the dropdown of "Help"
SpinVideoC_v140.dll depends on debug dlls
Spinnaker installer completed quickly, with nothing installed on the PC.
Spinnaker uninstallation fails, hanging at 95% of random packages
Implement stream related nodes for querying buffer pool sizes/counts
SpinView switching from Features tab to Settings tab after starting
Implement BUFFER_INFO_NEW_DATA for DSGetBufferInfo
Set 1MiB limit for StreamBlockTransferSize
Spinnaker and GenTL Logs missing from Spinview logging
SpinView_Qt Acquisition Mode dropdown menu is editable when device is streaming
SpinView_Qt Linux Acquisition Mode Dropdown Menu Is Cut Off
EXC_CRASH when trying to start SpinView and other precompiled examples in MAC OS with Spinnaker v1.24.0.60
SpinView_WPF 1.26.0.31 launches AdapterConfigGUI when selecting Configure Adapter Properties on network interface
Issue setting and forcing persistent IP in Spinview_QT
SpinView_WPF - Inference Label default color is white
SpinView_WPF IP config shows Failed setting current IP (camera) even though it does not fail
SpinView_Qt crashes with segfault when disconnecting an initialized/streaming camera
Firefly camera removal does not trigger removal event on Linux
Issue with multiple device reset on Ubuntu
SpinView 1.28.0.14 showing camera twice after force IP
SpinView_WPF crashes when changing acquisition modes with FireflyDL
Some BFS-PGE cameras hang when others are plugged into the same switch
Cannot update firmware with SpinView 1.27.0.48 and 1.28.0.14
Spinview_Qt 1.27.0.48 segfaults when Ax5 is selected
Cannot restart acquisition after DeviceReset on RaspberryPi3
Spinnaker Version format is inconsistent in Control Panel
Upgrade prompt page showing wrong format of installed Spinnaker version
SpinView_Qt category node names are editable
EndAcquisition() takes long when large amount of buffers are allocated
SpinView_Qt crashes when streaming from software disconnect/reconnect
FFY-U3 sometimes hangs when stopping/starting while streaming
SpinView_WPF sometimes fails to enumerate GigE cameras
Typo in Inference.py Example
Saving snapshot crashes SpinView_WPF
install_spinnaker.sh does not install spinnaker-doc
Dependency problem running remove_spinnaker.sh to install older Spinnaker
Camera doesn't show up when in updator mode.
Spinview_Qt 1.25.0.52 not able to cascade displays (streaming window) horizontally
Searching camera feature in SpinView_Qt does not work with spaces
BFLY-PGE doesn't do exposureauto "once" in api, but does in SpinView
Dead links in install_spinnaker.sh 1.27.0.48 and trying to register old version

Spinnaker SDK - 1.29.0.5

Enhancements

SpinView_WPF Auto Force IP should log a warning if no cameras are found
AcquisitionMultipleCamera Has Been Replaced By AcquisitionMultipleCameraRecovery
Update Spinnaker triggering examples to set TriggerSelector to FrameStart
Add support link to SpinView_WPF and SpinView_Qt
Spinnaker Ubuntu Dependency Installation

Resolved Issues

Linux installer tries to find Qt libraries in /usr/lib/
Issue with multiple device reset on Ubuntu
Single device shows two cameras in updater mode
SpinView_Qt crashes if the path to inference label is invalid
Spinview_QT cannot connect to camera in "Show only connected adapters" mode
Spinview_QT does not give feature descriptions when searching for feature
SpinView_WPF GUI hangs after executing force IP unless refreshing the device list
SpinView_WPF does not reset device tab view after GEV interface force IP
SpinView_WPF crashes when snapping image
Spinnaker Installer States a Newer Version of Spinnaker is Installed When an Older Version of Spinnaker is Installed
Windows USB transfer could be cancelled on active final1 packet during EndAcquisition()
Classification confidence shows 200% in SpinView_WPF
EndAcquisition() takes long when gdb is used
SpinPixelCorrection_WPF Crashes when applying filter
Spinnaker CameraPtr::EndAcquisition() hangs for 1.28.0.23
Fix Firmware update getting stuck at 97% issue

Spinnaker SDK - 1.28.0.23

Enhancements

SpinView_Qt - add ability to cascade displays (streaming window) horizontally
SpinView_Qt - add a progress indicator to File Access tab
SpinView_Qt - Have inference data tied to streaming window rather than image
SpinView_Qt - Add Camera FPS counter
StatusBarControls should be part of SpinView_WPF instead of GUI XML
Add support for device specific JPEG-LS payload type
Clang format for C#
SpinView_WPF Auto Force IP should log a warning if no cameras are found
AcquisitionMultipleCamera Has Been Replaced By AcquisitionMultipleCameraRecovery
Update Spinnaker triggering examples to set TriggerSelector to FrameStart
Add support link to SpinView_WPF and SpinView_Qt

Resolved Issues

SpinView_Qt Linux Acquisition Mode Dropdown Menu Is Cut Off
Versions of some example exe's are never updated
EXC_CRASH when trying to start SpinView and other precompiled examples in MAC OS with Spinnaker v1.24.0.60
AdapterConfigGUI forces user to set default gateway on network adapters
SpinView 1.26.0.31 camera not visible and auto force IP does nothing
SpinView_WPF 1.25 takes longer time to enumerate GigE cameras than 1.20
SpinView_Qt crashes (or does not stream again) when stream window is closed while streaming
SpinView_Qt Write-to-DDR tooltip has extra spaces
SpinView_Qt crashes with segfault when disconnecting an initialized/streaming camera
Spinview_Qt 1.27.0.48 segfaults when Ax5 is selected
SpinView_Qt category node names are editable
SpinView_Qt crashes if the path to inference label is invalid
Spinview_QT cannot connect to camera in "Show only connected adapters" mode
Spinview_QT does not give feature descriptions when searching for feature
SpinView_Qt crashes when streaming from software disconnect and reconnect
Searching camera feature in SpinView_Qt does not work with spaces
Cannot restart acquisition after DeviceReset on RaspberryPi3
Issue with multiple device reset on Ubuntu
Single device shows two cameras in updater mode
SpinView_WPF GUI hangs after executing force IP unless refreshing the device list
FFY-U3: Intel USB active transfer cancel fix.
SpinView WPF does not reset device tab view after GEV interface force IP
Saving snapshot crashes SpinView_WPF
Spinnaker Installer States a Newer Version of Spinnaker is Installed When an Older Version of Spinnaker is Installed
Windows USB transfer could be cancelled on active final1 packet during EndAcquisition()

Spinnaker SDK - 1.27.0.48

Enhancements

Add bounding-box display to SpinView_QT
Add Inference function calls to PySpin
CLONE - Make NodeMapInfo cycle through selectors
JPEG compression: introducing custom payload types for chunk data
SpinView_WPF FireFly support: Update"Inference Model Name" node when using FileAccess->InferenceGraph upload
Check "Enable Inference Label" Context menu item when Inference Camera is loaded on SpinView_WPF
BW DoLP/AoP display support in SpinView_WPF
SpinViewQT to support displaying inference results (Classification Network)
Check "Enable Inference Label" Context menu item when Inference Camera is loaded on SpinView_Qt
Add File Access Python example for Inference
SpinView_WPF - Add documentation dialog box on FFY initialization
Update SpinView with new polarization functions
Add checkbox+button to "File Access " tab to Spinview_WPF
Add C# version of setuserbuffer
Add File Access tab to SpinView_Qt
Add Polarization example on MacOS
Add initialize by serial number to Spinnaker C#
Add Inference example C++/Python to installer
SpinView_WPF - Have inference data tied to streaming window rather than image

Resolved Issues

AdapterConfigConsole not showing the rounded valid setting for jumbo packet
SpinView_Qt does not show increment value
GenTL debug binaries weren't being copied for vs2015 project
Issue with SpinView_QT recording window
Toggle Recording Image on SpinView_QT shows unexpected grabbed image numbers and saved image numbers
Toggle Recording Window for Images and Videos only changes Total # of Saved images and none of the other values
Cannot set offset value in SpinView_Qt
Update website links in Spinnaker
When streaming and saving images on a BFS-U3-16S2 on Ubuntu 16.04 with USB2.0 connection, the camera will stop after a while with -1010 SPINNAKER_ERR_IO
Updating firmware with invalid file name hangs SpinView_WPF
macOS /Applications/Spinnaker is not deleted
macOS SpinView_Qt not deleted properly
"make spinview" does not produce an executable SpinView app on macOS
Image Recording Issues for SpinView_qt
Spinnaker Linux Makefile not thread safe
Linux install_spinnaker.sh error
Spinnaker C Examples not building on Windows vs2010
Spinnaker Examples on Windows are failing with missing stdafx.cpp
Zooming streaming window does not uncheck "Stretch to fit" SpinView_Qt
SpinView_WPF - Inference Bounding Box lines disappear when zooming out.
Inference Label Display-Rendering sometimes freezes on 1.25.0.52
SpinView_WPF Configure Inference Label opens another window even if one is open
Spinnaker API calls "convert_image_to_displayable_format" causes heap error
SpinView_WPF: Mouse scrolling and panning do not work when Inference Bounding Box is on
MacOS uninstallation script does not remove files properly when not run with sudo
SpinView_WPF crash after deinitializing a camera while streaming
SpinView_WPF File Access tab is not always shown/populated for FireFly.
SpinView_Qt FileAccess tab is not removed when a camera is unplugged
Handle removal properly when camera is stuck in trigger mode
Missing macro declaration in SpinnakerPlatform.h
DEPRECATED_ENUM definition in SpinnakerDefs.h

Spinnaker SDK - 1.26.0.31

Enhancements

Add Optimize for frame rate button SpinView_WPF
Allow SpinView_WPF to show "Invisible" nodes
Replace/move user set save button
MacOS - Check multiple version installation behavior

Resolved Issues

Linux/Mac SpinView_QT search does not show all features
Precompiled LogicBlock example not available for all windows configurations
Acquisition Mode values are not synced in SpinViewQt ARM64 & Linux
LogicBlock exe file not packaged into Spinnaker
AdapterConfigGUI UI bugs
SpinView saves image without appending appropriate extentsions
Verify Python wrappers generated properly for Polarization related functionalities
Only show warnings when deprecated functions are used
Boost errors occurring for multithreaded program
Boost version conflicts for Ubuntu 16.04
The JPG2Option() (Options for saving JPEG2000 image) in Spinnaker adds wrong file extension to the image file
Device Features Panel/Stream Window does not close when disconnecting camera
Acquisition Mode values are not synced in SpinViewQt ARM64 & Linux
Convert does not change destination pixel format under certain circumstances
Update copyright year on our public headers/files
ChunkData setup with Sequencer may fail ValidPayloadSize Check
MacOS SpinView Qt toolbar does not show any Documentation
EnumerationEvents on MacOS issue with enumerating cameras
TLDevice.DeviceAccessStatus will only ever return ReadWrite or Unknown
Including Spinnaker generates compiler warnings on macOS
SpinView_Qt - Nodes not populated properly for AX5
MacOS installer installs contents in /usr which is SIP-protected
AdaptorConfig fail to populate IP address and advance settings
Precompiled LogicBlock example not available for all windows configurations
Spinview_WPF - Unable to Start Acquisition after refreshing nodemap
No chunk data in image events

Spinnaker SDK - 1.25.0.52

Enhancements

SpinView_Qt - You have to click twice on comboboxes and checkboxes to edit them
Add Polarization example for C#
Add Context Menu to SpinView_WPF to launch Adapter Config GUI (Qt)
Add MacOS Support
Change default control tab from Features to Settings
Only display "Received FPS" by default
Simple camera config saving button
Add additional FrameRate counter on SpinView calculated off Gige Image Leader timestamp
Add bounding-box display to SpinView
Remove normalization from the heat map utility
Update Ubuntu README on USB3 and GigE Suggestions

Resolved Issues

SpinView_Qt no hover text when device is connected to wrong subnet GigE
C++ NodeMapInfo_Quickspin example returning -1
Enable/disable GigE enumeration checkbox is not functioning
Recording not working if "Camera Evaluation" is selected when install Spinnaker 1.21.0.61
Fonts missing for spinview_qt Ubuntu 18.04 arm64
Spinnaker 1.23: Failed to initialize FLIR A65 thermal camera
PySpin AcquisitionMultipleCamera.py Example Saves Images only for the Last Camera
Auto-force IP assigns identical IP address to multiple cameras
BackgroundWorker error when camera does not get an image between stop and start.
BackgroundWorker error when streaming with Blackfly on SpinView WPF
BackgroundWorker error with changing Acquisition Mode the second time in SpinView WPF
stopping and starting acquisition in SpinView with trigger mode turned on causes errors
LUT Load from file and LUT save to file does not read / write the last table entries
Spinview crashes when streaming with multiple cameras using JPEGMono8
SpinView_WPF display window icon is zoomed in when it shouldn't be
System::GetInstance()->GetCameras().GetSize() return 0 for GigE cameras if multiple instances of Spinnaker application run at the same time
Spelling mistake in ImageUtility header file
Spinnaker Stack Corruption Runtime Error
Our license file that installers pull in is not up to date
Missing ChunkDataInference.h while building Examples.
Spinnaker installer firewall rules hide cameras on wrong subnet
Fix build Error: vs2015\NodeMapInfo_CSharp_v140.exe not building.
Spinnaker Segmentation Fault When A Camera Is Plugged In
Image Status Issue for BFLY-PGE

Spinnaker SDK - 1.24.0.60

Enhancements

Add Glare reduction to Spinview ,polarization example and ImageUtilityPolarization
Initial MacOS support
Add Python 3.7 support to PySpin
Add a prompt to SpinView to auto-force IP on misconfigured cameras
Linux installer udev configuration script improvements
Update GigE error messages
Add SpinUpdateConsole to allow command line firmware updating
Update PySpin wrapper with changes made to SpinUpdate interface

Resolved Issues

Saving a displayed image sometimes throws an error
Spinview: Making an error when saving the displayed polarized image
RGB8Packed not handled properly
Add error handling for SpinView_WPF force IP prompt
Fonts missing for spinview_qt Ubuntu 18.04 arm64
Adapter Config Utility does not work for 10G cards
Segmentation fault when selecting a camera in SpinView (ARMHF)
SpinView for ARM64 doesn't open feature/streaming window for any camera (U3V or GEV)
Examples/Spinview seg-fault on camera access

Spinnaker SDK - 1.23.0.27

Enhancements

Polarization - Deprecate Polarization/Heatmap in Image Class
Polarization - breakup heatmap into separate public function
Polarization - Break out Image Normalization into separate public function(s)
Polarization - Break out Image Scaling into seperate public function(s)
Polarization - Seperate ExtractPolarization() into seperate functions
Polarization - Complete Color Polarization Rework
Allow non contiguous memory blocks for SetUserBuffers with Spinnaker
Add FFMPEG to Spinnaker and FC2 package
Fix background color of button controls in streaming window
Detect GigE connectivity on 'Begin Acquisition'

Resolved Issues

Spinnaker SaveToAvi example cannot save video in H264 format
Some events are not fired on Linux in C
NewestOnly and NewestFirstOverwrite Issues on Spinnaker for Ubuntu
Notice is printing out enum type instead of name on Snap
Spinnaker 1.23.0.26 ImageUtility*.h files not packaged in Spinnaker
Spinnaker 1.23.0.26 install_spinnaker.sh script giving error

Spinnaker SDK - 1.22.0.31

Enhancements

Add Logic Block example to Windows/Linux Installer
Memory leak found in GigEDiscoveryThread
Memory leak found during USB Camera enumeration

Resolved Issues

SpinView will interpolate pixel format as "Mono8" if on camera debayering pxiel format is stored in camera memory channel
Invalid user buffer parameters when calling BeginAcquisition() on 32 bit
Spinnaker memory leak when recording with H264
SpinView WPF Config Device IP button does not open Window and IP error
Cannot start camera when using custom user Buffers, if Payloadsize is not multiple of 1024
Always run into onImageEvent with spinnaker 1.19.0.22 after camera dropped
BFS-PGE /ORX cameras not enumerate in SpinView under a network bridge , Windows 10
SpinView WPF stream error - SpinnakerNET.GUI.WPFControls.WPFCameraCaptureThread.ConvertLoop()
String format issue when searching for camera by serial number
EndAcquisition hangs for 6 minutes with PGRUsbCam3 2.7.3.94 must upgrade driver to 2.7.3.249 and above

Spinnaker SDK - 1.21.0.61

Enhancements

Allow FLIR A Series cameras to be used with Spinnaker
Add C++ logic blocks example
Recording video in SpinView_QT 1.15.0.63 Ubuntu
Enable OpenMP for our existing color processing algorithms
Modify EnumerationEvents to demonstrate enabling of GEV enumeration
Add new files for network permissions to the installer
Spinview feature sliders appear only when you click into the input field
Document minimum NumPy version in Readme file
Add options to Spinnaker installers for users to use ffmpeg or not
Thread reuse instead of create/destroy cycle for gige enumeration
determine which port USB3 cameras are connected to.
Change "2e+06" to 2000000 in Exposure_QuickSpin Example
Port ActionCommand functionalities to Linux
Optimizeptimize Bilinear Interpolation Algorithm
Add feature to load preset file for the camera
Add SWIG interface for Read/Write port to PySpin
Continue to optimize color processing algorithm for speed and performance
Add multi-threading support for Bilinear algorithm
C examples output improvement

Resolved Issues

Fix Image Format dialog when binning is changed
Spinview progress loop not resizing and moving correctly during firmware update and force IP
TypeError in PySpin: SpinUpdate
Spinnaker 1.11.0.47 - Windows - AcquisitionMultipleCamera_VB second camera not grabbing images
Spinnaker 1.13.0.33 - PySpin ImageChannelStatistics example is displaying deprecation warning
USB3 cameras don't stream in SpinView at full resolution with Fresco cards using Fresco drivers
Single Image Acquisition button in SpinView is not working properly with BFS cameras
Could not start acquisition on 32bit with StreamBuffers set to max
Cannot save image in SpinView when camera is not running
Memory Leak for colour polarized camera in Spinview
Verify that PySpin wheel file for python 3.6 does not install things into python3.7 folder
BufferHandling_CSharp Example failing
CounterAndTimer_CSharp example crashes
BufferHandling.py did not disable trigger mode when program exits
Multiple connection made to port address 8881 when using multiple GigE camera (Windows)
SpinView Polarization HeatMap Stokes Black Bars
After Single Acquisition,the camera does not stream without a power cycle
Polarization: HeatMap Stokes does not stream
Linux - SpinViewQT issues when camera is in updater mode
NodeMapInfo_C_QuickSpin example outputs "Device display name: 2048"
Compiler warnings when building examples on Linux
GEV camera on the wrong subnet shows up in multiple interfaces in SpinView_Qt
Histogram not working properly in SpinView
Invalid user buffer parameters when calling BeginAcquisition() on 32 bit
A stream's first frame will be the previous stream's last frame
SpinView firmware update errors out for BFS/Oryx
Memory access violation during IsImageInUse when streaming multiple cameras in SpinView_Qt
Video Recording not Working in SpinView 1.20 for BFS Cameras
Modify Actioncommands to not wait for Ack
Memory leak found in GigEDiscoveryThread
Memory leak found during USB Camera enumeration

Spinnaker SDK - 1.20.0.14/15

Enhancements

Spinnaker - Update API for Network Permissions Management
Adding a new System Nodemap to Quickspin
Allow to copy node description in Spinview Features view
Add properties to SpinView Settings and Information pane
Port Windows GEV device enumeration improvements to Linux
Update all Spinnaker C++ examples to use nullptr in place of NULL

Resolved Issues

Include AcquisitionMultiThread example
SpinView - Chunk Data and Stream Info not correctly displaying
Linux - SpinView_QT - Button presses not registered unless another widget is focused
Spinnaker ImageEvents_VB_vs2015 hangs
BufferHandling_CSharp Example failing
CounterAndTimer_CSharp example crashes
SpinView 1.19.0.22 Chunk Data Stream info still not displaying correctly
SpinView Polarization HeatMap Stokes Black Bars
SpinUpdateConsole failure with GEV cameras on ARM64
SpinView Polarized8 Pixel Format broken
Polarization: HeatMap Stokes does not stream
GigEConfig Example fails in ARMHF platform
Changes to SpinView to support grabbing images at max supported frame rate with 2 Oryx
C++ examples failed to compile on Linux bionic

Spinnaker SDK - 1.19.0.22

Enhancements

Write AcquisitionMultipleCamera examples
Write sequencer example for Python
Write HDR Example
Write LookupTable example for Python
Port C++ CounterAndTimer example to C#
Port C++ CounterAndTimer example to PySpin
Port C++ BufferHandling example to C#
Port C++ buffer handling example to PySpin
Add User Buffer to Spinnaker
Add ActionCommand to installer
Add SpinPixelCorrection tool to installer
Disable color processing in SpinView for mono pixel formats
Spinview: Add support for saving the displayed polarized image
Verify Polarization example on Linux and add to installer
Adding GPU image processing to SpinView
Ensure permission to write to working directory in Python examples

Resolved Issues

In Linux the first call of GetCameras() after AutoForceIP throws an exception
The button 'switch device driver' is gray in SpinView for USB cameras
PySpin: IsValid() comes up as true even though camera has been unplugged
ChunkData_VB example returning a -1 even when it passes
ImageConverter .Convert() call does not retain ImageID
SpinView do not recognize cameras after constructing a network bridge on Win10
SpinSimpleGUI_MFC memory usage increases when repeatedly stopping and starting stream
Spinnaker 1.15 32 and 64 bit Directshow Installation Failed
SpinView does not display increment for float nodes
Spinnaker 1.17.0.23 - Windows - SpinView - Total Message Capacity does not work
threads being constantly created and destroyed during image acquisition in Spinnaker
Spinnaker C++ - GetCameraByInvalidSerial/OutOfRange throws nullptr dereferenced error
SpinView incorrectly swaps MAC Address endianness
Buffer management does not work with large format cameras
ActionCommand example not packaged with Linux installer
Disconnecting BFS/ORYX camera while streaming throws unexpected exception in SpinView
SpinView crashes in Visual Studio when Spinnaker is not installed
Allows multiple host controllers on a single switch to detect all cameras on that switch
SpinView Histogram not working
Incorrect comparison in BufferHandling C++ example
Memory Leak reported in Visual Studio when closing SpinSimpleGUI_MFC after streaming from the camera and stopping the stream in Visual Studio
Socket timeout not set back to default after failing register reads
Spinnaker LineStatusAll chunk data not filled into image chunk data
Spinnaker - fix warnings in VB examples
SpinView_WPF debug encounters unhandled System exception when a camera is unplugged mid-stream
StreamBlockTransferSize not reset after Starting Acquisition
AcquisitionUserBuffer example uses nullptr which produces compile error
Spinnaker CSharp examples for 32 bit Windows should use the x86 configurations, not WIN32

Spinnaker SDK - 1.18.0.17

Enhancements

Add ActionCommand functionalities to Linux
New release 2.7.3.235 pgrusbcam and pgrusbcam3 drivers

Resolved Issues

SpinUpdate doesn't detect cameras with leading 0s properly
SpinView GUI display shows checkboard pattern in Stretch to Fit mode or when resizing the display window
Assertion failure when running SpinSimpleGUI_MFC in Visual Studio in debug mode
Spinview will crash when the network cards are more than 20 include 20
SpinnakerNETGUI vs2010 compilation issue

Spinnaker SDK - 1.17.0.23

Enhancements

Allow Spinnaker install without manually uninstalling previous installation
Add SerialRxTx, and FileAccess examples to installer

Resolved Issues

"SpinSimpleGUI_MFC" delay loading Spinnaker_$(PlatformToolset).dll errors in VS 2013
USB3 camera on USB2 Port on ARM board does not work
USB3 cameras don't stream in SpinView at full resolution with Fresco cards using Fresco drivers
memory leak in spinnaker 1.13.0.9 when BeginAcquisition and EndAcquisition
PySpin README missing installation instructions
Spinnaker 1.15.0.63_v1_15 - Linux - PySpin examples camera not detected issue
Access Violation exception when closing SpinSimpleGUI_MFC in Visual Studio
Exception thrown at GenTL_v140.dll when camera is removed and plugged in again using multiple threads

Spinnaker SDK - 1.15.0.63

Enhancements

Spinnaker Support for Ubuntu 18.04
Can not convert from 12 bit pixel formats to 16-bit pixel formats in Spinnaker
Show popup message when using 10 GigE cameras pointing to best practices
Reduce unnecessary register reads during GigE Vision device enumeration
SpinView WPF : Add an option to Viewer to enable displaying images with missing packets (incomplete images)
Add CounterAndTimer and BufferHandling examples to installer
Add GetLibraryVersion to examples

Resolved Issues

Spinnaker memory leaks during firmware update
Add multi threading support for event notifications to speed up event delays
SpinView crashes when updating GigE Vision firmware in another process
The "Save current image to disk" button on SpinView_QT 1.10.0.31 saves image in wrong resolution.
Spinnaker saves wrong pgm format image
Access Violation exception when running SpinSimpleGUI_MFC in VS2015
Unable to run applications linked against vs2010 SpinVideo
Spinnaker Windows timestamp may be reported inaccurately
Camera DeInit logs incorrect warnings/errors when camera already disconnected
GigE Vision GenTL interface throwing exceptions on nodes that should not be read
Unexpected exceptions thrown during DiscoverMaxPacketSize when enumerating GigE Vision cameras from multiple processes
Crash using Spinnaker for Python with multiple threads
Spinnaker C++ GetBySerial() should return NULL CameraPtr instead of throwing an exception
SpinView GUI display shows checkboard pattern while zoomed out
Camera removal/arrival order incorrect during automatic force IP
Linux SpinVideo should be removed after SpinView_QT
spinImageGetTimeStamp & GetTimestamp returning 0 on Ubuntu
Remove compilation warnings in Spinnaker GUI library on VS2015
Unable to launch SpinView unless we export LD_LIBRARY_PATH
make VS2015 the default for the web installer

Spinnaker SDK - 1.13.0.31/33

Enhancements

SpinView for Ubuntu does not display the SDK version
SpinView: Add crosshair for image inspection
Add GetLibraryVersion() call to Spinnaker

Resolved Issues

Spinnaker Windows - Attempt to Stream Gen 2 GigE crashes SpinView
Division by zero issue when calculating timecode for GEV cameras
SpinView_QT: Application terminates after pressing execute in DeviceUpdateList when no device is connected
Scheduled Action Command sometimes fails with mismatch timestamps
Spinnaker DirectShow: GraphEdit could not add video capture filter for Gige Camera
Spinnaker DirectShow: filter delivers RGB24 on request but it is actually RGB32
Spinnaker Python: Failing to import PySpin on Linux because we are not including SpinVideo
Cannot start acquisition on 32-bit Windows
SpinView: Fix driver switching between Halcon and Spinnaker usb3 drivers

Spinnaker SDK - 1.12.0.18

Enhancements

Add chunk data example to installer
Automatic configure buffer size based on size of image.Improves performance of higher resolution cameras

Resolved Issues

SpinSimpleGUI_WPF reports Error parsing XML when using non-BFS cameras
driverInstaller.exe can not install old lwf drivers when a newer version exist in the driver store
SpinSimpleGUI_WPF Event handler of ImageDrawingControl does not work.
Spinnaker GEV Heartbeat Timing out later than expected
Spinnaker Windows - SpinSimpleGUI_WPF crashes when trying to stream
Spinnaker Windows - SpinSimpleGUI_MFC - Fail to stream
Spinnaker Windows, Linux, ARM Python - NodeMapInfo_QuickSpin examples gives index out of range error
Crash when creating camera selection window using VS 2013 MFC dialog based project
SpinView_QT GUI doesn't launch on ARM boards
Spinnaker SDK cannot be used along with any other library using Boost in the same Project
Missing dependency for SpinView on ARM
Documenting our usage of FFMPEG 2.8 for Spinnaker Linux
Boost Conflict when using Spinnaker (1.58 vs 1.60)

Spinnaker SDK - 1.11.0.48

Enhancements

Include a debug statement to prevent heartbeat timeout on GigE cameras for Spinnaker examples
Update Spinnaker and FlyCapture2 projects to use latest Drivers 2.7.3.111
Separate Spinnaker and FFMPEG dependencies

Resolved Issues

ChunkData is always 0 when using ImageEvents in spinnaker
Using QuickSpin API to set camera attributes causes segmentation fault in Spinnaker 1.8.0.64
Synchronization mode when running two cameras the last frame is sometimes not displayed in SpinView
GigE cameras - The timestamp on images can overflow
Fix WriteableBitmap memory leak
SpinView crashes when USB3 Vision camera is disconnected
Spinnaker python 1.10.0.31 - SpinUpdate overflow error
Access Violation Error When running multiple (8+) USB3 Vision cameras
USB3 Vision cameras cannot stream at certain pixel formats at max resolution on 32 bit windows machines

Spinnaker SDK - 1.10.0.31

Enhancements

Initial Python support
Add driver version output to GenTL.log
Driver updated to version 2.7.3.95

Resolved Issues

Cannot type into filename field in Spinnaker Spinview
SpinView Linux becomes unresponsive if triggerMode is ON
SpinView forced to exit when GigE cameras are disconnected during streaming
SpinSimpleGUI_MFC does not work beyond 1.4
Problem streaming large format images for GEV camera on 32 bit Windows
Non-BFS cameras don't provide valid Frame ID when ImagePtr is used for Chunk data in Spinnaker
Spinnaker Linux - Exceptions are thrown when GigE camera nodes are being read by other threads while camera is streaming
EnumerationMultiple test failing because of network switch
setting exposure time to Trigger width causes never-ending pop up errors to occur (1.7.0.9)
Spinview: HAL error when plugging in BFS-PGE
Spinview: Device Packet Size warning with a working packet size configuration

Spinnaker SDK - 1.9.0.24

Enhancements

Add AcquisitionMultipleThread example for Windows and Ubuntu Linux
Add the ability to modify specify the file split size for AVI recording

Resolved Issues

StreamBufferHandlingMode newest/oldest first overwrite not working properly
Spinnaker Linux/Linux ARM; Chunk Data does not work with non-BFS GigE cameras
Write register access denied issues while running specific BFLY-PGE cameras
Spinview: GUI becomes very slow when camera is in trigger mode
Spinnaker 1.8.0.64 on Linux - IChunkData.h is missing - Application fails to compile
Handle integer pointers in ImageStatistics

Spinnaker SDK - 1.8.0.64

Enhancements

Add beta support for pythong (PySpin)
SpinView Qt - display a lock beside nodes that cannot be modified
SpinView Qt - Add ForceIP feature
Writing enumeration examples
writing nodemap callback example
Add NodeCallback support
Expose more information about image formats
Spinview QT - Add link to documentation folder to Help menu

Resolved Issues

The file size of the captured images are inconsistent with the width and height of the images
Spinnaker Linux - nodes from nodeMap cannot be read from/written to (GigE)
SpinView 1.5.0.27 (and newer) is slow/unresponsive while camera is in trigger mode
Bug 54285 - Memory leaks found with MFC app during enumeration events
Spinview_QT - Many buttons in "Device" window have no function
SpinView_QT - USB streaming application cannot stream for more than 3 hours
QuickSpin LineSelectorEnums is missing LineSelector_Line3
Spinnaker Linux: Streaming with GigE camera stops when image incomplete status occurs
Spinnaker Linux: Camera disconnects after running for ~1024 seconds
SpinView_Qt core dump on exit
Fix Windows installer for 1.8.0.57 to add missing IChunkData.h
Nodes are not checked for readability before printing in the C examples
Makefile display output displays @echo by accident
Linux - Searching tree nodes when streaming GigE causing imaging to stop

Spinnaker SDK - 1.7.0.9

Enhancements

New PgrLwf.sys 2.7.3.94 released
Spinview feature description field too small

Resolved Issues

SpinView_QT - Recording function saves an inconsistent amount of files
SpinView_QT - When images are recorded, an error always occur until the file format of the image is changed
SpinView_QT - Once the save directory has been set, it cannot be changed and all images save to the same directory
SpinView_QT - The save directory for videos cannot be set
Spinnaker Linux installation changes the group of all connected USB devices to "pgrimaging"
ARM - Shortcut for SpinView is generated
Memory leaks found when using SpinnakerC.h into a dll /debug/
Add GigEConfig to debian installer
Error message appears when GEV cameras are enumerated

Spinnaker SDK - 1.6.0.27

Enhancements

Change default rendering method to CPU
Spinview feature description field too small

Resolved Issues

Multiple begin acquisition events detected from one start acquisition
Some nodes fail to unlock in Spinview when streaming is stopped
"vshost.exe has stopped working" error when running 2013 VB examples after compilation (x64 debug)
Filter driver not installed nor copied in the installation path on a customers PC
Some camera nodes not writable after Single Frame acquisition
ARM - Device events are missing even at superspeed
ARM - Spinnaker::ImageConverter::Convert() results in a segmentation fault
ARM - Segmentation fault occurs when converting images to PixelFormat_RGBa8
SpinSimpleGUI sometimes throws an exception when ImageDrawingControl.Start() is called
SpinView_Qt - missing nodes in multi-tiered categories
SpinView_Qt - display ip addresses in treeview properly

Spinnaker SDK - 1.5.0.27

Enhancements

Initial support for Ubuntu 16.04 on ARMHF and ARM64
Add a GigEConfiguration utility

Resolved Issues

Compression quality/method changes for images don't work in SpinView/Spinnaker API
Can not set persistent IP in SpinView
Cognex: cannot initialize BFS-PGE if Spinnaker AIK installed

Spinnaker SDK - 1.4.0.40

Enhancements

Initial release of Spinnaker GUI for linux
log warning if packet size too large for receive
Add README documentation for installation/compilation
Drivers 2.7.3.93 released for updates to PGRUSBCAM and PGRUSBCAM3
Dropped frame reporting in SpinView diagnostics and logging window

Resolved Issues

Update C example make files
BFS-PGE-122S6 cannot stream with spinnaker in 24-bit pixel format
Investigate GUI XML Layout issue for GPIO page in 1.3.0.21
Several spinImageEvents when unplugging a camera
DeviceEvents example is not receiving expected event with GEV cameras
Cognex: cannot initialize BFS-PGE if Spinnaker AIK installed
using dhcp and unplugging camera may cause Spinnaker to crash
Spinnaker Convert() call picks the wrong bayer pattern in multiple camera situations
FL3-GE show wrong processed Frame rate information in spinview
Spinview crashed if there is a Gen2 GigE camera with a different network segment
Camera sometimes loses command or becomes stuck in pending ACK mode when a second camera is disconnected.
Non-BFS GigE cameras not enumerated in Spinnaker 1.3.0.21 unless they are in the right subnet
Log Viewer reports multiple messages for a single dropped frame

Spinnaker SDK - 1.3.0.21

Enhancements

Initial support for non-BFS GigE Vision camera families (GS2-GE, FL3-GE, BFLY-PGE, Zebra2)
Spinnaker Linux - Add SpinUpdateConsole to tarball package

Resolved Issues

No current way to configure the Transport Layer XML file path in linux
SpinView_Qt - fixes to compile using QtCreator on Windows
SpinView - Set IP configuration on adapter doesn't refresh device view
Stack overflow with Pixel_format_mono12packed is selected on FL3-GE
Exceptions when running Acquisition example
AcquisitionMultipleCamera_C example is failing to release system instance

Spinnaker SDK - 1.2.0.16

Enhancements

Initial Linux GUI support
New SpinVew_QT example for linux and windows
Remove Expand/Collapse control for advanced search options in TreeView
Updated Driver PGRLWF 2.7.3.92
Spinnaker Chunkdata examples should return true when node not writable when disabling chunkdata

Resolved Issues

"Limit Displayed FPS" feature is not working in SpinView
SpinView crashes when device list is continuously refreshed
Spinview should display the MAC Address Properly
Spinnaker programs segfault if VPN connection is open
SpinView recording window - Filename field doesn't allow user to enter filename, just path
Address range is incorrect for Serial Event data
Cannot Stream from two USB3.0 cameras from two separate Linux Spinnaker Application
Using lossless compression, Spinview sometimes reports IMAGE_DATA_INCOMPLETE and stops streaming
Firmware update for BFS Gige camera may fail in Windows
GEV device name stay as Updater after successful firmware update

Spinnaker SDK - 1.1.0.43

Enhancements

Initial BFS-PGE software release
Added Spinnaker DirectShow support for non-BFS products
Added Spinnaker DirectShow support for BFS-U3 on USB 2.0 ports

Resolved Issues

Add support for GigE cameras starting with Serial Number 17XXXXXX
Resolve Blue Screen caused by gige driver installation in 1.0.0.373
Spinnaker Linux GEV image incomplete issue
Spinnaker crashes when closing application when running in parallel with FlyCapture2
Spinnaker - fix build error with vs2010 project file
Spinnaker Linux - GigE enumeration problems with multiple devices connected to a switch

Spinnaker SDK - 1.00.0-373

Enhancements

Add support for Matlab via DirectShow
Add support for 10bit pixel formats when supported
Add StreamBlockTransferSize to stream nodemap
Add ability to set USB3 Vision image breakup size through data stream node
Add DeviceStreamWrite and DeviceStreamRead for C++, C, CSharp
Update LookupTable_C and Sequencer_C examples to be consistent with C++ examples
Update ImageEvents_CSharp example to use more than 10 images (20) and release image after done
Update new certificates used in installers
Update spinnaker installer name
Update default file logging priority to ERROR
Do not show enum entries that are not implemented
Make changes so that only one thread is able to start or stop the streaming of the camera

Resolved Issues

Fixed issues with the Web Installer not properly installing
Fixed multiple memory leaks
Fixed release C compiler in Makefile
Fixed usb arrival/removal issues
Fixed 64 bit libiomp5md.dll copied to 32 bit path in DirectShow project
Fixed return type of new sequencer example
Fixes for making sure C API handles are cleaned up properly during release and destroy calls

Spinnaker SDK - 1.00.0-295

Enhancements

Add support for all USB3 Vision cameras – BFS-U3, BFLY-U3, FL3-U3, GS3-U3, CM3-U3
Add Congex AIK support for all USB3 Vision cameras – BFS-U3, BFLY-U3, FL3-U3, GS3-U3, CM3-U3
Added log entry for detach node map
Adding third party library licenses to documentation package for Windows and Linux
Improving SpinView Streaming Performance
update windows build from boost 1.59 to boost 1.60
update freeimage to 3.17.0
Update examples in linux tarball - remove HighDynamicRange and add back missing C examples

Resolved Issues

Fix heap issues in VS2005, 2008, 2010, 2012
Change spin-conf with correct permission to allow multiple users to run examples
Link against an older version of FFMPEG so that Spinnaker runs on XP
Fix for occasional hang caused by BayerProcessingThread not terminating properly
Logarithmic Sliders not working in Spinview
Cognex – For color models, mono image appears when RGB Planar selected
Cognex Vision Pro - Streaming stops with Reverse X/Y nodes selected
Make sure data offset is within bounds when displaying pixel value under cursor
SpinnakerNet.log file is empty sometimes
IPP color processing crashes Spinnaker

Spinnaker SDK - 1.00.0-270

Enhancements

49609 - Add Spinnaker DirectShow interface
48058 - Spinnaker Linux Support

Resolved Issues

51224 - Cognex AIK - Color models show mono image when RGB Planar applied
51220 - Cognex AIK - ROI settings do not apply
50890 - Cognex AIK - Camera fails to stream when DeviceUserID or SetUserSave features are added in VisionPRO
50811 - Enumeration_C_Quickspin example incorrectly handles exception
50795 - Unable to software trigger BFS-U3-32S4 in specific configurations
50791 - Sequencer example fails to set width (node retrieval) because the node is locked
50536 - Memory leak found in Enumeration_C and Enumeration_C_QuickSpin examples
50527 - Spinnaker crashes when a node does not return a valid value
50491 - Memory leak found in EventAdapter and ChunkAdapter
50474 - Spinnaker AIK installs the wrong registry setting - camera cannot be enumerated
50122 - DIFxAPI.dll missing from bin and bin64 folder
49443 - Unable to enumerate interfaces when multiple adapters with same MAC addresses found
49078 - TreeView - Enable polling slows down image grabbing/processing
44168 - SpinSimpleGUI_MFC crashes when disconnecting a camera while streaming

Spinnaker SDK - 1.00.0-195

Enhancements

45657 - Support for Cognex with USB3 cameras via Cognex AIK
Resolved Issues
49933 - Sequencer VB example not setting width/height properly
49858 - Rebuilding 2012 example solution replaces 2010 example solution's FlyCapture2GUI dll file and vice versa
49792 - Update PATH env variable to point to new bin folders
49718 - Log messages are not populated with correct param messages
49529 - SpinnakerC - incorrect runtime /MDd used in release configuration
49504 - VB examples are exiting with value of -1
49420 - Unhandled exception found when running AcquisitionMultipleCamera_CSharp
46973 - Add IsAvailable check for POE Status node in GEV Interface node map

Spinnaker SDK - 1.00.0-173

Enhancements

None

Resolved Issues

43452 - Initial Software Release

By Camera Type

By Interface

Applications & Capabilities

Industries

Spinnaker SDK – 4.2.0.21 (Linux/ARM)

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 4.1.0.338 (Linux)

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 4.1.0.172 (MacOS)

Resolved Issues

Spinnaker SDK – 4.1.0.157 (MacOS)

Enhancements

Resolved Issues

Spinnaker SDK – 4.0.0.116

Breaking Changes

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 3.2.0.62

Enhancements

Resolved Issues

Spinnaker SDK – 3.2.0.57

Enhancements

Resolved Issues

Spinnaker SDK – 3.1.0.79

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 3.0.0.118

Breaking Changes

Enhancements

Resolved Issues

Spinnaker SDK – 2.7.0.128

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 2.6.0.160

Resolved Issues

Spinnaker SDK – 2.6.0.157

Resolved Issues

Spinnaker SDK – 2.6.0.156

Enhancements

Resolved Issues

Spinnaker SDK – 2.5.0.80

Enhancements

Resolved Issues

Known Issues

Spinnaker SDK – 2.4.0.144

Spinnaker SDK – 2.4.0.143

Enhancements

Resolved Issues

Spinnaker SDK – 2.4.0.110

Enhancements

Resolved Issues

Spinnaker SDK – 2.3.0.77

Enhancements

Resolved Issues

Spinnaker SDK – 2.2.0.48

Enhancements

Resolved Issues

Spinnaker SDK – 2.1.0.95

Enhancements

Resolved Issues

Spinnaker SDK – 2.0.0.147

Spinnaker SDK – 2.0.0.146

Enhancements

Resolved Issues

Spinnaker SDK - 1.29.0.5

Enhancements

Resolved Issues

Spinnaker SDK - 1.28.0.23

Enhancements

Resolved Issues

Spinnaker SDK - 1.27.0.48

Enhancements

Resolved Issues