The PI-MTE3 4096B 154 camera is engineered for direct detection in VUV, EUV and X-Ray imaging applications up to energies of 10keV. The in vacuum design and large sensor are ideal to operate inside ultra-high vacuum environments at very close proximity to samples while still capturing a large field of view or wide range of scattering angles. The off-axis sensor position allows the camera to be ideally positioned for small angle and grazing incidence applications. The deep cooling and low dark current of this camera are ideal for low signal applications where long exposure times are required while still being able to achieve fast readout using up to 4 readout ports.
Key Specs
- Full in-vacuum operation
- Deep cooling
- Sensor Size
- <10⁻⁹mbar, no outgassing
- < -55°C
- 61.4 x 61.4mm, 16 MPixel
PI-MTE3
Fully In-Vacuum for Ultimate Flexibility
Every PI-MTE3 is tested and 100% usable in-vacuum, even including the cooling and electrical cables, giving exceptional reliability for flexible camera placement within the vacuum chamber — ideal for experiments with different scattering angles.
Optimized Sensor Position
The sensor within the PI-MTE3 is positioned at the base of the camera, allowing for direct detection of ultra-low incident angles, optimal for x-ray diffraction. The sensor within the PI-MTE3 is positioned at the base of the camera, allowing for direct detection of ultra-low incident angles, optimal for x-ray diffraction.
Soft X-Ray Energy Sensitivity
With sensitivity in the X-ray energy range from 10 eV to 30 keV, the PI-MTE3 is well suited for a wide variety of soft x-ray spectroscopy and imaging applications, such as X-ray microscopy, X-ray plasma diagnostics and EUV lithography.
Specifications
Highlighted
- Resolution
- 4096 x 4096
- Camera Interface
- USB 3.0
- Pixel Size
- 15µm
- Frame Rate
- 0.56 fps
Detector
- Active Area
- 61.4 x61.4 mm
- Dark Current
- 0.0015 e⁻/pixel/sec
- Digitization
- 18 bit
- Dynamic Range
- 25000:1
- Horizontal-Pixels
- 4096
- Read Noise
- 6.0 e⁻ rms
- Vertical-Pixels
- 4096
Physical
- Dimensions
- 220.4 x 102.3 x 75.6 mm
- Humidity
- non-condensing
- Mass
- 2.7 kg
- Operating Temperature
- +5°C–+30°C
Media gallery
Resources & Support
Tech Note
Direct Detection of X-rays (30 eV to 20 keV) Using Detectors Based on CCD Technology
Read the StoryCustomer Story
High-Repetition Rate Laser-Matter Interactions for Solid Targets Customer Stories
Read the StoryContact Technical Support for any queries with your Teledyne Princeton Instruments camera and/or spectrometer, alongside purchasing extended warranty, accessories or software upgrades.
If you have an urgent issue, please call our Technical Support Team at (Toll free) +1 800 899 1144 or (+1) 609 587 9797 or email us directly at: [email protected].
Please visit our Contact Us page and choose "Contact Support" to get in touch with a support engineer.